Leak Testing Equipment for Data Center Components

Data Center Equipment Tested with Leak Detection Technology

Leak testing can help data centers verify the structural integrity of cooling components. Some of the most commonly leak-tested data center cooling components include:

• Coils
• Heat exchangers
• Refrigeration and expansion valves
• Cold plates
• Compressors
• Capacitors
• Manifolds, hoses, tubes, and other assemblies

Leak Testing Methods for Data Center Components

Different data center cooling components have different requirements. Your leak testing equipment must be able to test to the proper requirements. Our leak detecting equipment supports a variety of leak testing methods, including pressure decay, vacuum decay, mass flow, differential pressure decay, and burst testing.

Pressure Decay

Pressure decay testing is one of the most common testing methods. It involves pressurizing a component, stabilizing it, and monitoring for any pressure decrease, which indicates a leak.

Vacuum Decay

Vacuum decay testing is the opposite of pressure decay testing. With vacuum decay testing, a component is evacuated or depressurized, stabilized, and measured for any increase in pressure. This testing style is used for sealed components and measures vacuum loss.

Mass Flow

Mass flow testing monitors the amount of air flowing into or through a component. A mass flow sensor measures a stabilized component. Any detection of continuous airflow indicates a leak. This test is ideal for applications that require precise leak-rate measurement.

Differential Pressure Decay

Differential pressure decay testing differs from pressure decay testing in that it compares the pressure of the tested component against a reference volume. This testing method is ideal for components with highly precise pressure requirements or for detecting small leak rates.

Burst Testing

Burst testing involves pressurizing a component with a steady, continuous flow until it bursts or fails. This test measures the maximum pressure a component can tolerate and is often used to confirm whether components can withstand specific application requirements.

Leak Detection Equipment from LeakMaster

At LeakMaster, we supply leak detection equipment for data center components to ensure leak-free performance. Some of our key leak testing systems include:

• The Defender: Tests for pressure decay, vacuum decay, and occlusion testing.
• The Stealth: Tests for pressure decay, vacuum decay, differential pressure decay, and occlusion testing.
• The Guardian: Tests for pressure decay, vacuum decay, mass flow, differential pressure decay, occlusion testing, metered volume, and volumetric fill.
• The UltraFlow V3: Tests for mass flow, occlusion testing, and pressure decay.

Choose LeakMaster for Leak Testing Equipment for Data Center Cooling Components

Reliable, leak-free cooling components are essential to data center performance. At LeakMaster, we manufacture and supply high-quality leak testing equipment for data center cooling components. Backed by two decades of experience, proved leak testing products, and unrivaled customer service, we are a leading source of leak detection devices and systems.

Find the right solution for data center cooling components at LeakMaster. Contact us with any questions or to learn more and our team will happily assist you. Request a quote to get started on your order today!